Показаны сообщения с ярлыком traffic. Показать все сообщения
Показаны сообщения с ярлыком traffic. Показать все сообщения

190 Million Tires Thrown Away Each Year: Where’s The Rubberized Asphalt Concrete (RAC)?

Everyone wants to be eco-friendly. Everyone is concerned with electric cars and hydrogen cars and air cars and solar power on the roof and every possible way to reduce their “carbon footprint”… but what about tires?

More than 240 million tires are thrown away each year in the United States. Fewer than 7 percent are recycled, 11 percent are burned for fuel, and 5 percent are exported. The remaining 78 percent are sent to landfills, stockpiled, or illegally dumped. That’s almost 190 million old tires a year wasted in this country alone. People in the auto recycling industry have known this for years. Tires are a pain in the ass to get rid of, no one wants them.

But there is a perfect use for them…

A use that addresses a problem we already have. In effect, it kills two birds with one stone; and yet, we’re not doing it on a large scale. That perfect use is Rubberized Asphalt Concrete (RAC). It makes for better roads, it’s makes for roads that need less work later on, and it’s easy to make. You just shred the tires into what they call “crumb rubber”, then melt it down and mix it with asphalt. Done and done.

So why are we not using this in all our roads? There’s a very simple reason, and I’ve talked about it a few times before: The government has a monopoly on street building. Politicians get to pick which companies provide the materials and build for the streets. And the biggest companies have the best lobbyists and always donate the most money to campaigns - so they get the contracts. There is no incentive to use a new technology that works better, they don’t need to compete, they just need to donate to the right politician. And the politicians just worry about getting elected. They’re not concerned if a product works better.

And Rubberized Asphalt Concrete (RAC) does work better.

1. Using RAC clearly reduces road noise by as much as 85%
2. Applying a two-inch layer overlay of RAC can save $50,000 per lane mile compared to using four inches of conventional asphalt in the same application
3. An overlay of RAC can prevent cracks in underlying pavements from reflecting through to the surface of the new paving
4. RAC retains its original color better than conventional asphalt and markings remain more visible
5. Using RAC saves on maintenance costs, a properly designed application can last 50% longer than use of standard asphalt
6. RAC provides better traction and can reduce traffic accidents in poor weather

It makes for better roads, that’s an established fact. We have a surplus of old tires in this country wasting away in our landfills, and we have roads that are constantly being worked on and in need of repairs. The obvious conclusion is to use those waste tires in our roads.

But there are limitations to RAC, it’s less effective in very cold environments, and it can be more expensive initially, even though it saves money in the long term. So it’s not a 100% solution to the tire problem. We need to do other things with these tires in concert with using RAC in roads if we really want to make an impact.

What are some other uses for old tires? Leave them in the comments.



Related posts:



Related posts:



Read More!

UC Berkley Tests The Self-Steering Bus, Begins Slow Phase-Out Of The Effervescently Cheery Mass Transit Worker


[Photo Source: Autopia]

According to Autopia, UC Berkley geeks have tested a successful way to circumvent the reckless bus driver with a penchant for vehicular manslaughter [or perhaps that's just New Jersey's own that's coloring our perspective slightly] with a magnetized, self-steering bus. Developed by the California Partners for Advanced Transit and Highways, the self-steering bus isn’t completely automated as it relies on human braking and acceleration. It is self-piloting, however, and using magnetic strips embedded in the street, the automated bus flawlessly navigated a one-mile stretch of road and successfully parked itself within one centimeter of the curb during tests.

Magnetic guidance technology is what allows the bus to behave like a light rail transit vehicle, with magnetic markers placed in the street every 4 feet. Sensors mounted on the bus identify and track the markers, while the alternating polarity of the magnets allows an on-board computer to determine the buses precise latitudinal and longitudinal coordinates. The technology isn’t exactly new, but fuel, time, and money concerns are bringing it into the spotlight. Similar technology that would provide a buss rapid transit system to the bay area could wind up costing as much as $283 million, but simply outfitting the current fleet with a magnetic guidance system would only cost $5 million. Heralded as a major movement for improving traffic congestion and commuting conditions in general, the president of the Bay Area transit board of directors said, “The system has the potential to make bus rapid transit routes…as efficient as light rail lines, which in turn will make buses more efficient in getting people out of their cars.”



Related posts:



Related posts:



Read More!